Featured Resources
Explore the Resource Library to learn how Remcom's EM simulation products save time and reduce costs.
-
Read Flipbook
Transient EM/Circuit Co-Simulation in XFdtd: A Closer Look at TVS Diodes for ESD Protection
This whitepaper introduces XFdtd’s transient EM/circuit co-simulation capability, which combines the strength of 3D full-wave electromagnetic simulation with the flexibility of circuit solvers.
-
Read ArticleIndoor Connected Home Remote Camera Performance Analysis with XFdtd
This example discusses the performance, as simulated by XFdtd EM Simulation Software, of a generic remote camera that provides video surveillance around the house for security monitoring.
-
Get the Facts on 5G mmWave *-Explore the real-life obstacles & solutions for deployment of mmWave for 5G-*
Read the Report -
Read ArticleAnalysis of a Terahertz Dual-Band, Dielectric-Loaded Horn Antenna
In this example, XFdtd is used to analyze a conical horn antenna to radiate a lower frequency band at 94 GHz and a tapered dielectric strip to carry the higher band of 340 GHz.
-
Read ArticleWaveFarer Radar Analysis with Diffuse Scattering and Backscatter Through Walls
In this webinar learn about WaveFarer's features for automotive and indoor radar applications, including diffuse scattering from rough surfaces such as roads and the ability to transmit through walls.
-
Contact Remcom Today *-Ask about our flexible payment terms & customized solutions.-*
Contact Us -
Read ArticleXFdtd Simulation of a Millimeter Wave, Wideband Dielectric Resonator Antenna
In this example a cylindrical dielectric resonator is simulated in XFdtd to show how the excitation of higher order modes HEM113 and HEM115 can be used to produce wide bandwidth good gain performance.
-
Read ArticleIndoor Connected Home Smart Speaker WiFi Router Performance Analysis Using XFdtd
This example uses XFdtd to show the performance of a MU-MIMO WiFi router with antenna arrays for 2.4, 5, and 6-7 GHz ranges for 802.11a/b/g/n/ac uses with added capability for 802.11ax at 6 GHz.
-
Read ArticleRF Communications-Based Train Control (RF-CBTC) Showing Propagation Paths in a Train Station
A passenger train located in a station is connected to an access point (AP) mounted on the roof of the station. RF propagation paths computed using the shooting-and-bouncing ray technique are shown.
-
Read ArticleDemonstration of XFdtd's Electrostatic Discharge (ESD) Testing Features
Learn how to use XF's features for ESD testing as we walk through the process of analyzing a multi-layer PCB and identifying potential locations of dielectric breakdown.
-
Read Flipbook
Providing Narrowband IoT Coverage with Low Earth Orbit Satellites
This article describes the modeling of a SATCOM link, specifically the use case of using a satellite overlay to extend service continuity to IoT devices in a poorly covered rural area.
-
Read Flipbook
XFdtd Analyzes Complex Beam Steering Antenna Arrays
In this article, we demonstrate how XFdtd’s superposition and array optimization features simplify the process for understanding device performance by providing efficient validation of array coverage.
-
Follow Us On
Like our Page! -
Read Flipbook
Using WaveFarer Auto Radar Simulation and Chirp Doppler to Assess Radar Performance for Drive Scenarios
This presentation demonstrates ray-tracing and scattering simulations from WaveFarer combined with chirp Doppler analysis algorithms to assess radar performance for drive scenario simulations.
-
Read ArticleSolutions to Simplify 5G Phased Array Design in XFdtd
This webinar demonstrates XFdtd’s superposition and array optimization techniques for beamforming and beam steering applications.
-
Read ArticleDesign and Assessment of a 5G Base Station Using Massive MIMO for Fixed Wireless Access
This webinar demonstrates how Remcom's modeling and simulation tools can be used for Fixed Wireless Access applications.
-
Read Article5G Antenna Array Simulation for mmWave Wireless Virtual Reality Headsets
A 60 GHz antenna array design is simulated in XF to demonstrate suitability for use on wireless Virtual Reality headsets. The final design is simulated mounted on a section of a virtual reality visor.
-
Read Flipbook
Using EM Simulation for 5G Design E-Book
This collection of application examples demonstrates how REmcom's EM simulation software solves challenges related to 5G and MIMO.
-
Read ArticleThroughput of a 5G New Radio FD-MIMO System in an Urban Area Using Custom Beamforming
This example demonstrates how a custom beamforming table can be used to model downlink data rates from three MIMO base stations for 5G New Radio in a section of Boston.
-
Why Use FDTD Simulation Software? *-Learn about the advantages of Remcom's solutions here.-*
Learn More -
Read ArticleDesign and Simulation of 28 GHz Beamforming System and Antenna Array for 5G Network Base Stations | Remcom
In this example, XFdtd and RLD are used to design and analyze a 28 GHz antenna array capable of forming multiple beams for 5G network base stations.
-
Read ArticleDetailed Indoor Channel Modeling with Diffuse Scattering for 5G Millimeter-Wave Wireless Networks
This webinar demonstrates Wireless InSite’s diffuse scattering capability. An indoor office environment is used to show specific key effects of diffuse scattering.
-
Read ArticleA Unique Metric for Antenna Array Analysis in XFdtd
In this video from Remcom's booth at IMS 2019, Jeff Barney introduces the CDF of EIRP metric for antenna phased array analysis in XFdtd.
-
Read Flipbook
Simulation of Beamforming Using FD-MIMO for LTE-Advanced Pro in Urban Small Cell
This presentation demonstrates a new predictive tool for simulating FD-MIMO in urban environments. We analyze predicted multipath and compare performance of beamforming techniques.
-
Loading More...
