EM Simulation Numerical Methods for Comprehensive Design

This webinar demonstrates the strengths of XFdtd and Wireless InSite for designing and simulating smart home devices.

Learn about XFdtd’s schematic editor and frequency-domain circuit solver for analyzing matching networks and corporate feed networks.

In this example, a 140 GHz slot antenna array excited by a substrate integrated cavity is analyzed in XFdtd for use in wireless communications.

This example discusses the performance, as simulated by XFdtd EM Simulation Software, of a generic remote camera that provides video surveillance around the house for security monitoring.

In this webinar learn about WaveFarer's features for automotive and indoor radar applications, including diffuse scattering from rough surfaces such as roads and the ability to transmit through walls.

In this example, XFdtd is used to analyze a conical horn antenna to radiate a lower frequency band at 94 GHz and a tapered dielectric strip to carry the higher band of 340 GHz.

In this example a cylindrical dielectric resonator is simulated in XFdtd to show how the excitation of higher order modes HEM113 and HEM115 can be used to produce wide bandwidth good gain performance.

This example uses XFdtd to show the performance of a MU-MIMO WiFi router with antenna arrays for 2.4, 5, and 6-7 GHz ranges for 802.11a/b/g/n/ac uses with added capability for 802.11ax at 6 GHz.

A passenger train located in a station is connected to an access point (AP) mounted on the roof of the station. RF propagation paths computed using the shooting-and-bouncing ray technique are shown.

Learn how to use XF's features for ESD testing as we walk through the process of analyzing a multi-layer PCB and identifying potential locations of dielectric breakdown.

This webinar demonstrates XFdtd’s superposition and array optimization techniques for beamforming and beam steering applications.

This webinar demonstrates how Remcom's modeling and simulation tools can be used for Fixed Wireless Access applications.

A 60 GHz antenna array design is simulated in XF to demonstrate suitability for use on wireless Virtual Reality headsets. The final design is simulated mounted on a section of a virtual reality visor.