This Microwave Journal article provides a comparison of 3D planar EM simulation with fully arbitrary 3D EM simulation and informs users on which EM approach may work best for a given application.
In this paper, we use new modeling and simulation techniques to investigate some of the most critical chall...
Most Recent Flipbooks
This collection of application examples demonstrates how REmcom's EM simulation software solves challenges related to 5G and MIMO.
This article describes the modeling of a SATCOM link, specifically the use case of using a satellite overlay to extend service continuity to IoT devices in a poorly covered rural area.
This presentation demonstrates ray-tracing and scattering simulations from WaveFarer combined with chirp Doppler analysis algorithms to assess radar performance for drive scenario simulations.
Wireless InSite’s ray-tracing was used to analyze signal propagation in a complex urban scenario. These coverage results highlight potential obstacles and solutions for deployment of mmWave for 5G.
This article from the July 2019 issue of Microwave Journal introduces ESD simulation features in Remcom’s full wave electromagnetic simulation software package, XFdtd.
Our Waveguide Examples booklet showcases a collection of five different waveguide applications with downloadable project files.
In this interview from The Mobile Network, Remcom discusses how a new approach to Massive MIMO channel modeling will be key to success of 5G network rollouts and applications.
This paper outlines the advantages of FDTD EM simulation for analyzing antenna-in-system designs that include both the antenna package and the automobile body features surrounding the device.
How does Wireless InSite differ from your current planning tools? Discover the ten cues that your organization may need a channel modeling tool like Wireless InSite for your network planning efforts.
Remcom’s Wireless InSite provides an efficient method to predict channel characteristics for large-array MIMO antennas in complex multipath environments.
In this presentation, an example showcasing Wireless InSite's novel diffuse scattering technique is applied to an office environment at 73 GHz and is compared against measurements.
This presentation summarizes XFdtd's collection of features to mitigate ESD risk.
Modern antennas utilize MIMO technology in order to meet consumer demands for high data rates. As such, throughput is a required design metric when evaluating one antenna design versus another.
Wireless power transfer is an emerging technology used in many applications. This presentation shows how XFdtd can be used to simulate and analyze wireless charging systems.
This article uses a simple example of an 8x8 patch antenna array to demonstrate the usefulness of the CDF of EIRP to characterize the ability of an array to provide good EIRP in all directions.
This presentation demonstrates a new predictive capability for simulating massive MIMO antennas and beamforming in dense urban propagation environments.
This presentation demonstrates a new predictive tool for simulating FD-MIMO in urban environments. We analyze predicted multipath and compare performance of beamforming techniques.
Using XF's circuit co-simulation capability, we demonstrate importing broadband circuit models, optimizing the design, and calculating S-parameters, radiation patterns, and system efficiency.
This article describes Remcom's full wave matching circuit optimization approach for determining which component values provide the desired match for a given matching network layout.
In this paper, we use modeling and simulation techniques to investigate critical challenges that Fixed Wireless Access (FWA) faces for operation in the physical environment at millimeter waves.