Explore Remcom's resource library for the International Microwave Symposium 2020!
-
Solutions to Simplify 5G Phased Array Design in XFdtd
This webinar demonstrates XFdtd’s superposition and array optimization techniques for beamforming and beam steering applications.
-
ESD Testing and Damage Prediction Using XFdtd
This webinar introduces XF’s collection of ESD simulation features and demonstrates how to minimize the chance of undetected damage prior to hardware testing.
-
ESD Testing Resources *-See ESD Testing videos, webinars, and more.-*
Explore All -
Demonstration of XFdtd's Electrostatic Discharge (ESD) Testing Features
Learn how to use XF's features for ESD testing as we walk through the process of analyzing a multi-layer PCB and identifying potential locations of dielectric breakdown.
-
Explore XFdtd's Features *-XF simplifies analysis of even the most complex problems.-*
Feature Tour -
5G for Manufacturing and Industry 4.0 - Propagation in a Warehouse Environment
Wireless InSite predicts the coverage and interference and accounts for the multipath in complex environments such as heavy-industrial factories, warehouses, server farms and more.
-
Design and Simulation of 28 GHz Beamforming System and Antenna Array for 5G Network Base Stations | Remcom
In this example, XFdtd and RLD are used to design and analyze a 28 GHz antenna array capable of forming multiple beams for 5G network base stations.
-
XFdtd Analyzes Complex Beam Steering Antenna Arrays
In this article, we demonstrate how XFdtd’s superposition and array optimization features simplify the process for understanding device performance by providing efficient validation of array coverage.
-
XFdtd References *-A collection of technical papers comparing XF's results to measurements.-*
Read Now -
5G Antenna Array Simulation for mmWave Wireless Virtual Reality Headsets
A 60 GHz antenna array design is simulated in XF to demonstrate suitability for use on wireless Virtual Reality headsets. The final design is simulated mounted on a section of a virtual reality visor.
-
RF Communications-Based Train Control (RF-CBTC) Showing Propagation Paths in a Train Station
A passenger train located in a station is connected to an access point (AP) mounted on the roof of the station. RF propagation paths computed using the shooting-and-bouncing ray technique are shown.
-
Using EM Simulation for 5G Design E-Book
This collection of application examples demonstrates how REmcom's EM simulation software solves challenges related to 5G and MIMO.
-
5G Millimeter Wave Frequencies and Mobile Networks Technology Research Slides
Wireless InSite’s ray-tracing was used to analyze signal propagation in a complex urban scenario. These coverage results highlight potential obstacles and solutions for deployment of mmWave for 5G.
-
Providing Narrowband IoT Coverage with Low Earth Orbit Satellites
This article describes the modeling of a SATCOM link, specifically the use case of using a satellite overlay to extend service continuity to IoT devices in a poorly covered rural area.
-
Wireless InSite Capabilities *-Explore Wireless InSite's unique feature list.-*
Explore Now -
LTE and 5G NR Propagation in a Suburban Environment using Wireless InSite 3D Ray Tracing
This simulation shows the coverage prediction from LTE sites in a suburban downtown area. With the emergence of 5G, Fixed Wireless Access and small cell mobile service can be provided.
-
Wearable Dual-Band MIMO Antenna
Various designs of a dual-band antenna constructed from textile fabrics for use in a wearable application are evaluated using XFdtd.
-
Wireless InSite References *-See how Wireless InSite was used in this assortment of validation papers.-*
Read Papers -
Time Domain Simulation of Electrostatic Discharge Testing
This article from the July 2019 issue of Microwave Journal introduces ESD simulation features in Remcom’s full wave electromagnetic simulation software package, XFdtd.
-
Waveguide Examples Using XFdtd
Our Waveguide Examples booklet showcases a collection of five different waveguide applications with downloadable project files.
-
Download Product Brochures
See Brochures -
Simulation of Electrostatic Discharge (ESD) Testing with XFdtd
This presentation summarizes XFdtd's collection of features to mitigate ESD risk.
-
5G mmWave Channel Modeling with Diffuse Scattering in an Office Environment
This example uses Wireless InSite’s diffuse scattering capability to perform simulations of an indoor wireless network and predict channel characteristics for millimeter wave frequencies.
-
Throughput of a 5G New Radio FD-MIMO System in an Urban Area Using Custom Beamforming
This example demonstrates how a custom beamforming table can be used to model downlink data rates from three MIMO base stations for 5G New Radio in a section of Boston.
-
Simulation of Massive MIMO Beamforming in an Urban Small Cell
This webinar demonstrates Wireless InSite’s MIMO simulation capability to predict the multipath and channel characteristics for a Massive MIMO system in an urban small cell.
-
Design and Assessment of a 5G Base Station Using Massive MIMO for Fixed Wireless Access
This webinar demonstrates how Remcom's modeling and simulation tools can be used for Fixed Wireless Access applications.
-
Loading More...