In this video, a Remcom engineer walks through the steps to set up and tune a Ku Band microstrip lens in Rotman Lens Designer (RLD). We populate the physical, electrical, and transmission line properties and analyze the performance of the lens by plotting the array factor and beam to array phase error. This data helps us to further tune the lens by adjusting the focal ratio and beam port excitation, and then we export the S-Parameters. Finally, we discuss the various options for exporting the file and importing into XFdtd EM Simulation Software, including the use of a customized script. The script import method automatically sets up the ports and also includes the material properties.
Explore our channel onSubscribe Today!
Most Recent Articles
A passenger train located in a station is connected to an access point (AP) mounted on the roof of the station. RF propagation paths computed using the shooting-and-bouncing ray technique are shown.
In this video tutorial series, we walk through a step-by-step outdoor propagation analysis using Wireless InSite MIMO.
In this presentation, we discuss analyzing and optimizing an aperture coupled 1x4 patch antenna array with a compact, fan-shaped feeding network for operation in 60 GHz band using XFdtd.
Learn how to use XF's features for ESD testing as we walk through the process of analyzing a multi-layer PCB and identifying potential locations of dielectric breakdown.
In this video tutorial, we offer a step-by-step guide to perform an indoor propagation analysis in an enterprise environment.
Wireless InSite predicts the coverage and interference and accounts for the multipath in complex environments such as heavy-industrial factories, warehouses, server farms and more.
This simulation shows the coverage prediction from LTE sites in a suburban downtown area. With the emergence of 5G, Fixed Wireless Access and small cell mobile service can be provided.
In this video, Remcom's product marketing manager, Jeff Barney, describes the process of simulating the antenna element, modeling the channel propagation, and calculating the throughput modulation.
WaveFarer is a software tool created specifically for automotive radar sensor design and placement. It enables Tier 1 suppliers to virtually test and refine results earlier in the design process.
This video demonstrates antenna radiation far field pattern results viewing, including 3D view and 2D cutplane plots, in XFdtd.
This demonstration shows how Wireless InSite meets 3GPP and METIS channel modeling requirements for 5G.
This video demonstrates Wireless InSite's MIMO capability to generate the complex channel matrices for several mobile devices in an urban scene and visualizes beamforming in motion.
In this video from Remcom's booth at IMS 2019, Jeff Barney introduces the CDF of EIRP metric for antenna phased array analysis in XFdtd.
This video gives a demonstration of Full-Wave Antenna Matching Circuit Optimization using XFdtd's Circuit Element Optimizer (CEO).
This video demonstrates CAD import options in XFdtd, including the import of a PCB in ODB++ and subsequent parameterization and modification of the geometry. We also discuss XF's CAD Merge feature.
This video tutorial series helps XFdtd users to create and analyze a broadband antenna. The series will guide you through XF's antenna design process.
This short video clip highlights the waveguide ports feature in XF.
This video uses several examples to demonstrate XFdtd's various meshing techniques: 2D Cutplane Mesh Views, 3D Mesh Cropping, and XACT Accurate Cell Technology for curved geometries.
Remcom’s XGtd can simulate the propagation paths of fields interacting with two wind turbines in close proximity.
XFdtd integrates with Optenni Lab for antenna matching circuit optimization. This brief video shows the highlights of the workflow and integration using a GPS and Bluetooth mobile device antenna.