Remcom will be demonstrating our EM simulation software suite for complete end-to-end design of complex devices and wireless communication systems at IMS 2020! This brief introductory video highlights XFdtd's superposition feature, ESD testing, and new wireless propagation applications for Wireless InSite, including Industry 4.0.
This article describes the modeling of a SATCOM link, specifically the use case of using a satellite overla...
Other content in this Stream
Wireless InSite predicts the coverage and interference and accounts for the multipath in complex environments such as heavy-industrial factories, warehouses, server farms and more.
In this video tutorial series, we walk through a step-by-step outdoor propagation analysis using Wireless InSite MIMO.
A passenger train located in a station is connected to an access point (AP) mounted on the roof of the station. RF propagation paths computed using the shooting-and-bouncing ray technique are shown.
In this presentation, an example showcasing Wireless InSite's novel diffuse scattering technique is applied to an office environment at 73 GHz and is compared against measurements.
This simulation shows the coverage prediction from LTE sites in a suburban downtown area. With the emergence of 5G, Fixed Wireless Access and small cell mobile service can be provided.
Wireless InSite’s ray-tracing was used to analyze signal propagation in a complex urban scenario. These coverage results highlight potential obstacles and solutions for deployment of mmWave for 5G.
In this video tutorial, we offer a step-by-step guide to perform an indoor propagation analysis in an enterprise environment.
This article describes the modeling of a SATCOM link, specifically the use case of using a satellite overlay to extend service continuity to IoT devices in a poorly covered rural area.
Professor Ram Narayanan of Penn State's College of Engineering worked with Remcom to produce a 5G millimeter wave coverage concept using existing AT&T towers in State College, PA.
This presentation demonstrates a new predictive capability for simulating massive MIMO antennas and beamforming in dense urban propagation environments.
This presentation demonstrates a new predictive tool for simulating FD-MIMO in urban environments. We analyze predicted multipath and compare performance of beamforming techniques.
This example demonstrates how a custom beamforming table can be used to model downlink data rates from three MIMO base stations for 5G New Radio in a section of Boston.
Learn about Wireless InSite, key features and output, and the MIMO version of the product.
This collection of application examples demonstrates how REmcom's EM simulation software solves challenges related to 5G and MIMO.
In this paper, we use modeling and simulation techniques to investigate critical challenges that Fixed Wireless Access (FWA) faces for operation in the physical environment at millimeter waves.
In this paper, we use new modeling and simulation techniques to investigate some of the most critical challenges that FWA faces for operation in the physical environment at millimeter waves.
How does Wireless InSite differ from your current planning tools? Discover the ten cues that your organization may need a channel modeling tool like Wireless InSite for your network planning efforts.
In this video, Remcom's product marketing manager, Jeff Barney, describes the process of simulating the antenna element, modeling the channel propagation, and calculating the throughput modulation.
Remcom’s Wireless InSite provides an efficient method to predict channel characteristics for large-array MIMO antennas in complex multipath environments.
This webinar shows how geometry caching expedites repeated simulations within the same scene, such as with 5G small cell investigations, plus covers new optimizations that enable time reductions.